• Revolutionary new three mode transmission featuring conventional, crab and round steering that can be shifted while the dolly is moving or stationary, without the dolly operator’s hands leaving the steering handle. This transmission has the ability to be adjusted to provide perfect steering geometry when reconfiguring the chassis to its various leg positions. No other transmission has been able to do this.
  • The Super PeeWee IV now provides for much less maintenance.
    • The need for air bleeding has been eliminated.
    • Corrosion resistance has been dramatically improved.
    • All exposed working joints have been sealed.
    • Far greater precision greatly reduces the need for adjustments. All adjustments, if required by operator’s specific desires, can be done externally without removing bolted covers or lids.
    • Steering chain adjustments have been virtually eliminated, dramatically reducing maintenance time.
    • Larger hydraulic capacity requires less recharging.
    • Greater strength reduces the possibility of damage.
    • Modular design of steering transmission and shifting linkage facilitates quick and easy replacements.
  • New arm design provides greater operator clearance, while assuring greater rigidity, smoothness, speed and added vertical travel. This new trim arm design also allows for lower camera setups when the camera is located above the chassis. All edges and corners are rounded to provide for greater operator comfort.
  • New valve concept gives the operator much improved control, providing for greater speed with added precision.
  • Stop valve now requires no tools to make adjustments. Accessibility is now directly in front of the dolly operator, providing for quick and easy adjustments.
  • Improved Universal Head performance is now achieved. Added arm precision, a control cylinder and a middle rib provides major gains in safety and rigidity.
  • The Super PeeWee IV has a new side board system. Professional feedback has led to this new design that provides complete walk-a-round ability at both the high and low levels.
  • Leg positions have been improved to enhance performance by providing:
    • 0º position for narrowest configuration with standard tires.
    • 10º position for narrowest configuration with pneumatic tires OR for side mounting the dolly on 880 mm track.
    • 44º position for standard 24½” track alignment and general all-around use.
    • 84º position for maximum lateral stability or for side mounting dolly on 24½” track.
    • Front legs at 84º, rear legs at 0º. This is the three-point contact position for standard tires which is great for outdoor use on rough terrain.
    • 70º position where Tread and Wheel Base are Equal, called the S position.
    • Front legs at 84º, rear legs at 10º. This is the three-point contact position for pneumatic tires, which is great for outdoor use on rough terrain.
    • Front legs at 180º and the rear legs at 0º provides the most compact dolly configuration with Standard Solid Tires, making the Super PeeWee IV efficient, even in especially tight quarters.
  • The Super PeeWee IV now comes with built-in heat control for the hydraulic system to maintain a minimum hydraulic oil temperature of 70°F, thus providing constant performance, even in the coldest environments.

Technical Specs

Max Camera Mount Height (Position 1-90 Degree Mode)
5 ft. 1/2 in.
1.53 m
Min Camera Mount Height (Position 1-90 Degree Mode)
27 1/4 in.
69 cm
Vertical Boom Travel (Position 1-90 Degree Mode)
33 1/4 in.
84 cm
Max Camera Mount Height (Position 2-45 Degree Mode)
4 ft. 10 1/2 in.
1.48 m
Min Camera Mount Height (Position 2-45 Degree Mode)
26 in.
66 cm
Vertical Boom Travel (Position 2-45 Degree Mode)
33 1/4 in.
84 cm
Maximum Camera Mount Height (Position 3-Low Mode)
4 ft. 3 in.
1.3 m
Minimum Camera Mount Height (Position 3-Low Mode)
19 in.
48 cm
Vertical Boom Travel (Position 3-Low Mode)
33 1/4 in.
84 cm
Max Camera Mount Height (Position 4 - Extender Mode)
5 ft. 1/2 in.
1.53 m
Min Camera Mount Height (Position 4 - Extender Mode)
19 in.
48 cm
Vertical Boom Travel (Position 4 - Extender Mode)
41 1/4 in.
1.05 cm
Min Camera Mount Height (Low Bar w/4-Way Leveling Head No Rise)
4 1/2 in.
11 cm
Max Camera Mount Height (Low Bar w/4-Way Leveling Head No Rise)
3 ft. 1 in.
94 cm
Chassis Width - All Legs at 0º (Use in Tight Quarters)
20 in.
51 cm
Chassis Width - All Legs at 10º (Pneumatic or 880 mm Track Position)
25 in.
64 cm
Chassis Width - All Legs at 45º (Track Position)
28 in.
71 cm
Chassis Width - All Legs at 70º (Tread and Wheel Base Are Equal Position)
32 in.
79 cm
Chassis Width - All Legs at 84º (Sideways or Scissors Track Position)
32 3/4 in.
81 cm
Chassis Width - Front Legs at 84º/Rear at 0º (3 Point Solid Tire Position)
32 3/4 in.
81 cm
Chassis Width - Front Legs at 84º/Rear at 10º (3 Pt. Pneumatic Tire Position)
32 3/4 in.
81 cm
Chassis Width - Front Legs at 180º/Rear at 0º (Compact Solid Tire Position)
20 in.
51 cm
Chassis Width - Front Legs at 170º/Rear at 10º (Compact Pneumatic Tire Position)
25 in.
64 cm
Steering Post Height
35 in.
89 cm
Minimum Chassis Length
2 ft. 10 in.
87.6 cm
Maximum Chassis Length
3 ft. 10 in.
1.09 m
*Maximum Payload with Accumulator Charge at 2,400psi
320 lb
145 kg
*Maximum Payload with Accumulator Charge at 2,600psi
350 lb
159 kg
**Maximum Payload with High Post Kit
1,100 lb
499 kg
Maximum Number of Lifts on a Single Charge
5 lifts
Accumulator Charging Time (Empty to Full)
60 sec.
Carrying Weight
295 lb
134 kg
Operational Weight
329 lb
149 kg
Operation Weight w/ High Post Kit (w/o Payload)
386 lb
175 kg

* Payload Includes All Items (i.e. Man, Camera, Platform, Turret, Crane Arm, etc.) on Arm
** Payload Includes All Items (i.e. Man, Camera, Platform, Turret, Crane Arm, etc.) on Base Mount.

Our Kit

SPW IV Left Side Board
SPW IV Right Side Board
SPW IV Left Full Side Board
SPW IV Right Full Side Board
SPW IV Upper Front Board
SPW IV Lower Front Board
SPW IV Upper Left Support Board
SPW IV Upper Right Support Board
SPW IV Lower Left Support Board
SPW IV Lower Right Support Board
SPW IV Left Rear Extension Board
SPW IV Right Rear Extension Board
SPW IV Star Plate (Set of 2)
SPW IV Quarter Filler Plates (Set of 2)
SPW IV Full Filler Plates (Set of 2)
SPW IV Tracking Bar with (2) 12" Extensions
SPW IV Seat Offset Arm - Long Post
SPW IV Low Profile Leveling Head
SPW IV Lowest Profile Leveling Head
SPW IV 4-Way Leveling / Swing Head
SPW IV Lifting Bars / 2-Short, 2- Long (Set of 4)
SPW IV Long Narrow Side Board - Right
SPW IV Long Narrow Side Board - Left
SPW IV Battery Plate
SPW IV Accessory Cart w/ Cover
SPW IV Quick Release Tire Clip - Set of 8
SPW IV Pin-Locking Swivel Seat
SPW IV Medium Tires* (Standard Hard) - Set of 8

*Medium Tires can be used on Hard Floor, Studio, Stage & Tracks; Pneumatic tires available upon request.

Related Items